74HCT574D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT574 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Clock Frequency | 76MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 50 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT574D,653 Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. As part of the package Tape & Reel (TR), it is embedded. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. Currently, the operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74HCTseries of FPGAs. You should not exceed 76MHzin the output frequency of the device. The element count is 1 . During its operation, it consumes 8μA quiescent energy. Currently, there are 20 terminations. D latch belongs to the 74HCT574 family. An input voltage of 5Vpowers the D latch. This JK flip flop has a 3.5pFfarad input capacitance. It belongs to the family of electronic devices known as HCT. This board is designed with 16pins on it. Vsup reaches 5.5V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be kept above 4.5V. A total of 2ports are embedded in the D flip flop. This T flip flop features a maximum design flexibility due to its output current of 6mA. Additionally, you may refer to the D latch's additional BROADSIDE VERSION OF 374.
74HCT574D,653 Features
Tape & Reel (TR) package
74HCT series
16 pins
74HCT574D,653 Applications
There are a lot of Nexperia USA Inc. 74HCT574D,653 Flip Flops applications.
- Memory
- Bus hold
- Buffered Clock
- Digital electronics systems
- Event Detectors
- Counters
- Single Down Count-Control Line
- Registers
- Asynchronous counter
- ESD protection
