74HCT574DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 76MHz |
| Propagation Delay | 15 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT574DB,118 Overview
The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. The Tape & Reel (TR)package contains it. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~125°C TA. This D latch has the type D-Type. It belongs to the 74HCTseries of FPGAs. This D flip flop should not have a frequency greater than 76MHz. In total, it contains 1 elements. Terminations are 20. The 74HCT574family includes it. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 3.5pF farads. In this case, the D flip flop belongs to the HCTfamily. There is an electronic component mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. There are 8bits in this flip flop. The flip flop has 2embedded ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. 8input lines are available for you to choose from. As a result, it consumes 8μA of quiescent current without being affected by external factors. As an additional reference, you may refer to electronic flip flop BROADSIDE VERSION OF 374.
74HCT574DB,118 Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
74HCT574DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT574DB,118 Flip Flops applications.
- Patented noise
- Data storage
- Data Synchronizers
- Storage Registers
- Memory
- Bus hold
- Power down protection
- Clock pulse
- Set-reset capability
- Matched Rise and Fall
