74HCT574N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | BULK PACK |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT574 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 76MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 50 ns |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT574N,652 Overview
20-DIP (0.300, 7.62mm)is the packaging method. You can find it in the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74HCT series. There should be no greater frequency than 76MHzon its output. D latch consists of 1 elements. T flip flop consumes 8μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74HCT574family make up this object. An input voltage of 5Vpowers the D latch. A 3.5pFfarad input capacitance is provided by this T flip flop. In this case, the D flip flop belongs to the HCTfamily. This device is part of the FF/Latchesbase part number family. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 4.5V. As a result of its reliable performance, this T flip flop is suitable for BULK PACK. It runs on 5Vvolts of power. This D flip flop is equipped with 0 ports. In addition, you can refer to the additinal BROADSIDE VERSION OF 374 of the D latch.
74HCT574N,652 Features
Tube package
74HCT series
5V power supplies
74HCT574N,652 Applications
There are a lot of NXP USA Inc. 74HCT574N,652 Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Guaranteed simultaneous switching noise level
- Latch
- Safety Clamp
- Shift registers
- Balanced Propagation Delays
- Convert a momentary switch to a toggle switch
- Common Clocks
- Synchronous counter
- Memory
