74HCT574PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 35mA |
| Number of Bits | 8 |
| Clock Frequency | 76MHz |
| Propagation Delay | 33 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT574PW,118 Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. It is included in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to 4.5V~5.5V. The operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. You should not exceed 76MHzin its output frequency. In total, it contains 1 elements. It has been determined that there have been 20 terminations. D latch belongs to the 74HCT574 family. It is powered by a voltage of 5V . Its input capacitance is 3.5pF farads. This D flip flop belongs to the family of HCT. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device has Positive Edgeas its clock edge trigger type. There are 8bits in its design. The flip flop contains 2ports. The supply voltage should be maintained at 5V for high efficiency. This T flip flop features a maximum design flexibility due to its output current of 35mA. The number of input lines is 8. It consumes a total of 8μA quiescent current at any given time. There is also a characteristic of BROADSIDE VERSION OF 374.
74HCT574PW,118 Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
74HCT574PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT574PW,118 Flip Flops applications.
- Control circuits
- Frequency division
- Computers
- Communications
- QML qualified product
- Cold spare funcion
- Circuit Design
- Single Down Count-Control Line
- Bounce elimination switch
- Digital electronics systems
