74HCT7273D,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT7273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 56MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | OPEN-DRAIN |
| Current - Output High, Low | - 4mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT7273D,112 Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. The package Tubecontains it. There is a Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~125°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74HCTseries of FPGAs. Its output frequency should not exceed 56MHz Hz. In total, it contains 1 elements. T flip flop consumes 8μA quiescent energy. The number of terminations is 20. It is a member of the 74HCT7273 family. A voltage of 5V is used as the power supply for this D latch. Input capacitance of this device is 3.5pF farads. It belongs to the family of electronic devices known as HCT. This device is part of the FF/Latchesbase part number family. There is a 5.5Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 4.5V. There are 5V power supplies attached to it.
74HCT7273D,112 Features
Tube package
74HCT series
5V power supplies
74HCT7273D,112 Applications
There are a lot of NXP USA Inc. 74HCT7273D,112 Flip Flops applications.
- Cold spare funcion
- QML qualified product
- Differential Individual
- Control circuits
- Pattern generators
- Dynamic threshold performance
- Communications
- Latch-up performance
- Instrumentation
- Shift Registers
