74HCT7273N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 56MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | - 4mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HCT7273N,112 Overview
It is embeded in 20-DIP (0.300, 7.62mm) case. The package Tubecontains it. Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. Through Holeis occupied by this electronic component. A voltage of 4.5V~5.5Vis required for its operation. -40°C~125°C TAis the operating temperature. D-Typedescribes this flip flop. It belongs to the 74HCTseries of FPGAs. It should not exceed 56MHzin its output frequency. D latch consists of 1 elements. It consumes 8μA of quiescent JK flip flop input capacitance is 3.5pF farads.
74HCT7273N,112 Features
Tube package
74HCT series
74HCT7273N,112 Applications
There are a lot of Rochester Electronics, LLC 74HCT7273N,112 Flip Flops applications.
- Bounce elimination switch
- Latch
- Cold spare funcion
- 2 – Bit synchronous counter
- Modulo – n – counter
- Single Up Count-Control Line
- Test & Measurement
- Asynchronous counter
- Clock pulse
- Count Modes
