74HCT7403D,518
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | REGISTER BASED; BUBBLE BACK 2.7US |
| HTS Code | 8542.39.00.01 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT7403 |
| JESD-30 Code | R-PDSO-G16 |
| Function | Asynchronous, Synchronous |
| Current - Supply (Max) | 1mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 256 64 x 4 |
| Clock Frequency | 12MHz |
| Access Time | 61ns |
| Data Rate | 30MHz |
| Organization | 64X4 |
| Output Characteristics | 3-STATE |
| Memory Width | 4 |
| Memory Density | 256 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | No |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 83.33 ns |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT7403D,518 Overview
16-SOIC (0.295, 7.50mm Width) is a package that contains FIFO memory chip.This FIFO memory chip is packaged as a Tape & Reel (TR) .In addition, the FIFO chip has a memory capacity of 256 64 x 4 , which can be used to store applications and data.To ensure reliable operation, the temperature should be regulated to -40°C~125°C .There is a mounting type of Surface Mount on the FIFO memory.Operating voltage is 4.5V~5.5V .The 74HCT series contains this memory logic.In this case, the FIFO's maximum supply current is 1mA .FIFO's FIFO's maximumI believe it belongs to the 74HCT7403 family of numbers.If the supply voltage is set to 5V , high efficiency can be achieved.A total of 16 terminations are contained within FIFO means.There is a self-contained gadget within FIFOs .In this part, the memory type is OTHER FIFO .Normaly, the component is powered by 5V power supplies.This gadget can also generate REGISTER BASED; BUBBLE BACK 2.7US .Vsup is set to 5.5V (FIFO memory IC's maximum supply voltage).Keeping the supply voltage (Vsup) above 4.5V is essential for normal operation.In this FIFO memory IC, the clock runs at frequency 12MHz .
74HCT7403D,518 Features
256 64 x 4 memory size
74HCT series
Best part number of 74HCT7403
FIFOs category
Clock frequency of 12MHz
74HCT7403D,518 Applications
There are a lot of NXP USA Inc. 74HCT7403D,518 FIFOs Memory applications.
- Wireless
- Game Controller
- Medical Monitoring Device
- IP Camera Buffer
- Video Processing
- High-speed graphics pixel buffer
- Rate buffers
- Telecommunication
- Buses
- TVs
