74HCT74BQ-Q100,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Clock Frequency | 59MHz |
| Propagation Delay | 60 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 44ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT74BQ-Q100,115 Overview
14-VFQFN Exposed Padis the packaging method. D flip flop is included in the Tape & Reel (TR)package. There is a Differentialoutput configured with it. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. In this case, the operating temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74HCT series. A frequency of 59MHzshould be the maximum output frequency. D latch consists of 2 elements. As a result, it consumes 40μA quiescent current and is not affected by external forces. A total of 14terminations have been recorded. This D latch belongs to the family of 74HCT74. A voltage of 5V is used as the power supply for this D latch. There is 3.5pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as HCT. There is an electronic component mounted in the way of Surface Mount. This board has 14 pins. This device has Positive Edgeas its clock edge trigger type. Optimal efficiency requires a supply voltage of 5V. It consumes 80μA of quiescent current without being affected by external factors.
74HCT74BQ-Q100,115 Features
Tape & Reel (TR) package
74HCT series
14 pins
74HCT74BQ-Q100,115 Applications
There are a lot of Nexperia USA Inc. 74HCT74BQ-Q100,115 Flip Flops applications.
- Digital electronics systems
- Buffered Clock
- Registers
- Differential Individual
- Computers
- Frequency Dividers
- Computing
- Balanced 24 mA output drivers
- High Performance Logic for test systems
- Parallel data storage
