74HCT74BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 59MHz |
| Propagation Delay | 18 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 44ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT74BQ,115 Overview
The package is in the form of 14-VFQFN Exposed Pad. D flip flop is embedded in the Tape & Reel (TR) package. Differentialis the output configured for it. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. The operating temperature is -40°C~125°C TA. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. It should not exceed 59MHzin terms of its output frequency. As a result, it consumes 40μA quiescent current. The number of terminations is 14. The 74HCT74 family contains this object. A voltage of 5V is used as the power supply for this D latch. A 3.5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as HCT. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. In order to achieve its superior flexibility, 2 circuits are used. High efficiency requires the supply voltage to be maintained at 5V. There are 4 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. As of now, there are 8input lines. As a result, it consumes 80μA of quiescent current without being affected by external factors.
74HCT74BQ,115 Features
Tape & Reel (TR) package
74HCT series
14 pins
74HCT74BQ,115 Applications
There are a lot of Nexperia USA Inc. 74HCT74BQ,115 Flip Flops applications.
- ESCC
- Count Modes
- Circuit Design
- Memory
- ATE
- Data storage
- Pattern generators
- Individual Asynchronous Resets
- Patented noise
- Buffer registers
