74HCT74D-Q100,118
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Clock Frequency | 59MHz |
| Propagation Delay | 60 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 44ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
74HCT74D-Q100,118 Overview
The package is in the form of 14-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. The output it is configured with uses Differential. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~125°C TA. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74HCT series. This D flip flop should not have a frequency greater than 59MHz. In total, it contains 2 elements. Despite external influences, it consumes 40μAof quiescent current. There are 14 terminations,D latch belongs to the 74HCT74 family. The D flip flop is powered by a voltage of 5V . Its input capacitance is 3.5pFfarads. The electronic device belongs to the HCTfamily. Electronic part Surface Mountis mounted in the way. It is designed with 14 pins. It has a clock edge trigger type of Positive Edge. Optimal efficiency requires a supply voltage of 5V. There is a consumption of 80μAof quiescent current from it.
74HCT74D-Q100,118 Features
Tape & Reel (TR) package
74HCT series
14 pins
74HCT74D-Q100,118 Applications
There are a lot of Nexperia USA Inc. 74HCT74D-Q100,118 Flip Flops applications.
- High Performance Logic for test systems
- Storage Registers
- Synchronous counter
- Single Down Count-Control Line
- ATE
- Reduced system switching noise
- ESD protection
- Cold spare funcion
- Control circuits
- Clock pulse
