74HCT74PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 59MHz |
| Propagation Delay | 60 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 44ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT74PW,112 Overview
The item is packaged in 14-TSSOP (0.173, 4.40mm Width)cases. It is included in the package Tube. The output it is configured with uses Differential. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. -40°C~125°C TAis the operating temperature. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74HCT series. You should not exceed 59MHzin the output frequency of the device. As a result, it consumes 40μA quiescent current and is not affected by external forces. Currently, there are 14 terminations. Members of the 74HCT74family make up this object. The power supply voltage is 5V. JK flip flop input capacitance is 3.5pF farads. Electronic devices of this type belong to the HCTfamily. There is an electronic component mounted in the way of Surface Mount. There are 14pins on it. This device has Positive Edgeas its clock edge trigger type. To achieve this superior flexibility, 2 circuits are used. Optimal efficiency requires a supply voltage of 5V. It operates with 1 output lines. It consumes 80μA of quiescent current without being affected by external factors.
74HCT74PW,112 Features
Tube package
74HCT series
14 pins
74HCT74PW,112 Applications
There are a lot of Nexperia USA Inc. 74HCT74PW,112 Flip Flops applications.
- Frequency Dividers
- Single Down Count-Control Line
- Test & Measurement
- Frequency Divider circuits
- Power down protection
- Individual Asynchronous Resets
- Pattern generators
- Latch
- Cold spare funcion
- 2 – Bit synchronous counter
