74HCT74PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Voltage | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Nominal Supply Current | 80μA |
| Output Current | 25mA |
| Clock Frequency | 59MHz |
| Propagation Delay | 60 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Number of Inputs | 1 |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 44ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Ambient Temperature Range High | 125°C |
| Height | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT74PW,118 Overview
It is embeded in 14-TSSOP (0.173, 4.40mm Width) case. There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Differential. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. -40°C~125°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. It should not exceed 59MHzin terms of its output frequency. As a result, it consumes 40μA of quiescent current without being affected by external factors. A total of 14 terminations have been made. It is a member of the 74HCT74 family. A voltage of 5V is used to power it. JK flip flop input capacitance is 3.5pF farads. The electronic device belongs to the HCTfamily. There is an electronic part mounted in the way of Surface Mount. This board has 14 pins. In this device, the clock edge trigger type is Positive Edge. The superior flexibility is achieved through the use of 2 circuits. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. With an output current of 25mA, this device offers maximum design flexibility. As a result, it consumes 80μA of quiescent current without being affected by external factors. Inputs are set to 1.
74HCT74PW,118 Features
Tape & Reel (TR) package
74HCT series
14 pins
74HCT74PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT74PW,118 Flip Flops applications.
- Counters
- Power down protection
- Load Control
- Event Detectors
- High Performance Logic for test systems
- Latch-up performance
- Data transfer
- Balanced 24 mA output drivers
- Data storage
- Cold spare funcion
