Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
48 |
Weight |
223.195796mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Series |
74HSTL |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
Subcategory |
FF/Latches |
Voltage - Supply |
3.15V~3.45V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Base Part Number |
74HSTL16919 |
Pin Count |
48 |
Output Type |
Standard |
Operating Supply Voltage |
3.45V |
Circuit |
9:18 |
Power Supplies |
3.3V |
Output Current |
24mA |
Number of Bits |
9 |
Turn On Delay Time |
1.9 ns |
Family |
TTL/H/L |
Logic Function |
D-Type |
Output Characteristics |
SERIES-RESISTOR |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type, Addressable |
Output Polarity |
TRUE |
Trigger Type |
POSITIVE EDGE |
Propagation Delay (tpd) |
5.3 ns |
Independent Circuits |
1 |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74HSTL16919DGGRE4 Overview
In the package 48-TFSOP (0.240, 6.10mm Width), it can be found. Packaged in the way of Tape & Reel (TR). It is configured with an output of Standard. The Logic type of this electrical device is D-Type, Addressable. Electronic components are mounted using the Surface Mount method. The supply voltage of the device is 3.15V~3.45V. During operation, the temperature is set at 0°C~70°C. The 74HSTL series of FPGAs is the one this FPGA belongs to. 9 Bits are used in the design of this electronic part. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family it belongs to is 74HSTL16919. The supply voltage of the device is 3.3V. There are 48 pins attached to it. This electronic device is categorized as a TTL/H/L electronic device. 48 pins are used in its design. Mounting this electronic component follows the Surface Mount method. In the subcategory FF/Latches, this part belongs. A total of 3.3V power supplies are needed to run it. Due to its 24mA output current, it offers maximum design flexibility. High efficiency requires maintaining the supply voltage at 3.45V.
74HSTL16919DGGRE4 Features
48-TFSOP (0.240, 6.10mm Width) package
74HSTL series
9 Bits
74HSTL16919 family
48 pin count
48 pins
3.3V power supplies
74HSTL16919DGGRE4 Applications
There are a lot of Texas Instruments 74HSTL16919DGGRE4 Latches applications.
- Relay replacement
- Lamp and Display (LED)
- Up/down difference counting
- Motor Drives
- Counter control
- Network Switches
- Buffer/Storage Registers
- Sample and hold register
- OC-48 communication systems
- Pattern generators