74HSTL16919DGGRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HSTL |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Subcategory | FF/Latches |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74HSTL16919 |
| Pin Count | 48 |
| Output Type | Standard |
| Operating Supply Voltage | 3.45V |
| Circuit | 9:18 |
| Power Supplies | 3.3V |
| Output Current | 24mA |
| Number of Bits | 9 |
| Turn On Delay Time | 1.9 ns |
| Family | TTL/H/L |
| Logic Function | D-Type |
| Output Characteristics | SERIES-RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type, Addressable |
| Output Polarity | TRUE |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 5.3 ns |
| Independent Circuits | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HSTL16919DGGRG4 Overview
In the 48-TFSOP (0.240, 6.10mm Width) package, it is embedded. As a result, it has a packaging of Tape & Reel (TR). In its configuration, Standard is used as the output. In this electrical device, the logic type is D-Type, Addressable. The electronic component is mounted according to the Surface Mount method. It operates at a voltage of 3.15V~3.45V. A temperature of 0°C~70°C is set as the operating temperature. It is a type of FPGA belonging to the 74HSTL series. An electronic part with 9 bits is designed. This device has 48 terminations. It belongs to 74HSTL16919 family. In order to operate it, the supply voltage must be 3.3V. The device is equipped with 48 pins. In the world of electronics, this electronic device belongs to the family of TTL/H/L. With the design of the board, there are only 48 pins. It is mounted according to the Surface Mount method. This part is included in FF/Latches. 3.3V power supplies are needed to operate it. Due to its 24mA output current, it offers maximum design flexibility. For maximum efficiency, the supply voltage should be set to 3.45V.
74HSTL16919DGGRG4 Features
48-TFSOP (0.240, 6.10mm Width) package
74HSTL series
9 Bits
74HSTL16919 family
48 pin count
48 pins
3.3V power supplies
74HSTL16919DGGRG4 Applications
There are a lot of Texas Instruments 74HSTL16919DGGRG4 Latches applications.
- Serial Output Register
- Registers
- Communication systems
- Avionics
- Audio and video switching
- Up/down difference counting
- Shift left with parallel loading
- Serial Input
- Storage
- Parallel Output
