74LCX112MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 173mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Base Part Number | 74LCX112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 150MHz |
| Propagation Delay | 9 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7.5ns @ 3.3V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 7pF |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Negative Edge |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LCX112MTCX Overview
As a result, it is packaged as 16-TSSOP (0.173, 4.40mm Width). A package named Tape & Reel (TR)includes it. It is configured with Differentialas an output. The trigger it is configured with uses Negative Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type JK Type. The FPGA belongs to the 74LCX series. It should not exceed 150MHzin its output frequency. A total of 2elements are present in it. A total of 16 terminations have been made. JK flip flop belongs to 74LCX112 family. It is powered from a supply voltage of 2.5V. This T flip flop has a capacitance of 7pF farads at the input. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. There is an electronic part mounted in the way of Surface Mount. A total of 16pins are provided on this board. In this device, the clock edge trigger type is Negative Edge. The RS flip flops belongs to FF/Latches base part number. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. There are 3.3V power supplies attached to it. The number of input lines is 5. 10μAquiescent current consumed.
74LCX112MTCX Features
Tape & Reel (TR) package
74LCX series
16 pins
3.3V power supplies
74LCX112MTCX Applications
There are a lot of ON Semiconductor 74LCX112MTCX Flip Flops applications.
- Matched Rise and Fall
- Count Modes
- Instrumentation
- Data storage
- Parallel data storage
- Shift Registers
- Registers
- Balanced 24 mA output drivers
- Patented noise
- Reduced system switching noise
