74LCX112SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 242mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LCX |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Base Part Number | 74LCX112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7.5ns @ 3.3V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 7pF |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Negative Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LCX112SJ Overview
It is packaged in the way of 16-SOIC (0.209, 5.30mm Width). You can find it in the Tubepackage. It is configured with Differentialas an output. Negative Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. A 2V~3.6Vsupply voltage is required for it to operate. -40°C~85°C TAis the operating temperature. JK Typedescribes this flip flop. The 74LCXseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 150MHz. During its operation, it consumes 10μA quiescent energy. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. If you search by 74LCX112, you will find similar parts. It is powered from a supply voltage of 2.5V. A 7pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of LVC/LCX/Z. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. This device has Negative Edgeas its clock edge trigger type. Vsup reaches its maximum value at 3.6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. To achieve this superior flexibility, 2 circuits are used. This input has 5lines.
74LCX112SJ Features
Tube package
74LCX series
16 pins
74LCX112SJ Applications
There are a lot of ON Semiconductor 74LCX112SJ Flip Flops applications.
- ESD performance
- Bus hold
- Digital electronics systems
- Patented noise
- Frequency division
- Circuit Design
- Counters
- 2 – Bit synchronous counter
- Bounce elimination switch
- Power down protection
