banner_page

74LCX162373MEA

D-Type, Latch 2V~3.6V 16 Bits Tri-State Latches 74LCX Series 74LCX162373 DUAL CMOS 48-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74LCX162373MEA
  • Package: 48-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 877
  • Description: D-Type, Latch 2V~3.6V 16 Bits Tri-State Latches 74LCX Series 74LCX162373 DUAL CMOS 48-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-BSSOP (0.295, 7.50mm Width)
Number of Pins 48
Operating Temperature -40°C~85°C
Packaging Tube
Series 74LCX
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
Technology CMOS
Voltage - Supply 2V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 2.5V
Base Part Number 74LCX162373
Output Type Tri-State
Number of Elements 2
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Min (Vsup) 2V
Number of Ports 2
Number of Bits 16
Propagation Delay 6.2 ns
Turn On Delay Time 1.5 ns
Family LVC/LCX/Z
Logic Function D-Type, Latch
Current - Output High, Low 12mA 12mA
Logic Type D-Type Transparent Latch
Number of Input Lines 4
Number of Output Lines 3
Length 15.875mm
RoHS Status RoHS Compliant
Lead Free Lead Free

74LCX162373MEA Overview


The package in which it is embedded is named 48-BSSOP (0.295, 7.50mm Width). Tube is the way in which it is packaged. It uses the output configuration Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. It operates at a voltage of 2V~3.6V. A temperature of -40°C~85°C is used for operation. The 74LCX series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 16 bits. A device with this design has 48 terminations. It belongs to 74LCX162373 family. The device works with a voltage of 2.5V for its supply voltage. It is a member of the LVC/LCX/Z family of electronic devices. In addition, it is designed with a pin number of 48. A Surface Mount mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. (Vsup) should be greater than 2V. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. A binary equivalent of the input line is generated by the 3 output lines. A total of 2 elements are contained in it.

74LCX162373MEA Features


48-BSSOP (0.295, 7.50mm Width) package
74LCX series
16 Bits
74LCX162373 family
48 pins
2 elements

74LCX162373MEA Applications


There are a lot of ON Semiconductor 74LCX162373MEA Latches applications.

  • Storage
  • Counter
  • Sample and hold register
  • Buffer/Storage Registers
  • Display
  • Up-Down Johnson
  • Serial Output Data Queuing
  • Serial Output Register
  • Watches
  • Multistage ripple counting

Write a review

Note: HTML is not translated!
    Bad           Good