74LCX162374MTD
| Parameters | |
|---|---|
| Number of Pins | 48 |
| Weight | 421mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LCX |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~3.6V |
| Base Part Number | 74LCX162374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Bits | 16 |
| Clock Frequency | 170MHz |
| Propagation Delay | 7.3 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
74LCX162374MTD Overview
The item is packaged in 48-TFSOP (0.240, 6.10mm Width)cases. There is an embedded version in the package Tube. T flip flop uses Tri-State, Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. In the operating environment, the temperature is -40°C~85°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74LCXseries of FPGAs. You should not exceed 170MHzin the output frequency of the device. Despite external influences, it consumes 20μAof quiescent current. This D latch belongs to the family of 74LCX162374. This T flip flop has a capacitance of 7pF farads at the input. It is mounted by the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. This flip flop is designed with 16 Bits. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 2input lines have been provided.
74LCX162374MTD Features
Tube package
74LCX series
48 pins
16 Bits
74LCX162374MTD Applications
There are a lot of ON Semiconductor 74LCX162374MTD Flip Flops applications.
- EMI reduction circuitry
- Latch-up performance
- ESCC
- Frequency Divider circuits
- Shift Registers
- Power down protection
- Memory
- Safety Clamp
- Test & Measurement
- Common Clocks
