74LCX16374G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 54-LFBGA |
| Number of Pins | 54 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | 74LCX |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 54 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 2.5V |
| Base Part Number | 74LCX16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 170MHz |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 6.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 1.4mm |
| Width | 5.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LCX16374G Overview
54-LFBGAis the way it is packaged. Package Trayembeds it. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. A supply voltage of 2V~3.6V is required for operation. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74LCX series. Its output frequency should not exceed 170MHz. It consumes 20μA of quiescent current without being affected by external factors. The number of terminations is 54. The 74LCX16374 family contains this object. The D flip flop is powered by a voltage of 2.5V . There is 7pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as LVC/LCX/Z. It is mounted in the way of Surface Mount. The 54pins are designed into the board. It has a clock edge trigger type of Positive Edge. There are 16bits in this flip flop. For normal operation, the supply voltage (Vsup) should be kept above 2V. This D flip flop is equipped with 0 ports. In order for the chip to function, it has 3output lines. Currently, there are 2 lines of input.
74LCX16374G Features
Tray package
74LCX series
54 pins
16 Bits
74LCX16374G Applications
There are a lot of ON Semiconductor 74LCX16374G Flip Flops applications.
- Divide a clock signal by 2 or 4
- Storage Registers
- Latch
- Consumer
- Frequency Dividers
- Balanced 24 mA output drivers
- Bus hold
- Event Detectors
- Convert a momentary switch to a toggle switch
- Functionally equivalent to the MC10/100EL29
