74LCX16374MTDX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 421mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LCX16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 170MHz |
| Propagation Delay | 7.9 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 6.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 170000000Hz |
| Width | 6.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LCX16374MTDX Overview
The package is in the form of 48-TFSOP (0.240, 6.10mm Width). It is included in the package Tape & Reel (TR). In the configuration, Tri-State, Non-Invertedis used as the output. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. -40°C~85°C TAis the operating temperature. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74LCX series. Its output frequency should not exceed 170MHz Hz. A total of 48 terminations have been made. Members of the 74LCX16374family make up this object. A voltage of 2.5V provides power to the D latch. A JK flip flop with a 7pFfarad input capacitance is used here. It is a member of the LVC/LCX/Zfamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. It is designed with 16bits. Normally, the supply voltage (Vsup) should be kept above 2V. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. This flip flop has a total of 2ports. There are no output lines on the JK flip flop. This input has 2lines. It consumes 20μA current.
74LCX16374MTDX Features
Tape & Reel (TR) package
74LCX series
48 pins
16 Bits
74LCX16374MTDX Applications
There are a lot of ON Semiconductor 74LCX16374MTDX Flip Flops applications.
- QML qualified product
- Matched Rise and Fall
- Functionally equivalent to the MC10/100EL29
- Single Up Count-Control Line
- Event Detectors
- Power down protection
- Communications
- Cold spare funcion
- High Performance Logic for test systems
- Control circuits
