banner_page

74LCX257MTC

2V~3.6V 16 Pin 74LCX257 Signal switch74LCX Series


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74LCX257MTC
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 494
  • Description: 2V~3.6V 16 Pin 74LCX257 Signal switch74LCX Series (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 173mg
Operating Temperature -40°C~85°C
Packaging Tube
Published 2000
Series 74LCX
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Multiplexer
Voltage - Supply 2V~3.6V
Base Part Number 74LCX257
Circuit 4 x 2:1
Polarity Non-Inverting
Number of Circuits 4
Throw Configuration DPST
Propagation Delay 6 ns
Quiescent Current 10μA
Turn On Delay Time 6.5 ns
Number of Inputs 8
Current - Output High, Low 24mA 24mA
Supply Type Single
Number of Input Lines 2
Voltage Supply Source Single Supply
Independent Circuits 1
Height 900μm
Length 5mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74LCX257MTC Overview


In order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).Tube is the method used for packaging.The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.With a supply voltage of 2V~3.6V, designers have greater flexibility of digital controlled switch.Multiplexers of the 74LCX series can be used in a wide range of applications.There is a base part number of 74LCX257 which can also be used in order to locate the logic switch that are related to this item.As a type of supply, Single is employed.This multiplexer ic is configured with 16 pins.This unit is mounted in the way of Surface Mount.It consumes 10μA current of multiplexer ic without external influences.The multiplexer is equipped with 8 inputs.To accept voltage levels, the multiplexers have2 input lines.It is necessary for the digitalswitch to operate normally that 4 circuits be formed.

74LCX257MTC Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
2 input lines

74LCX257MTC Applications


There are a lot of ON Semiconductor 74LCX257MTC Signal Switches / Multiplexers / Decoders applications.

  • Enabling different functions units in microprocessor instruction decoding
  • Memory chips
  • Code conversion
  • Arithmetic Logic Units
  • Video transmission
  • D/A converters
  • Small scale TV wall
  • Data transfer
  • A/D converters
  • VGA

Write a review

Note: HTML is not translated!
    Bad           Good