74LCX373SJX
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 481.5mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74LCX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LCX373 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LCX373SJX Overview
In the 20-SOIC (0.209, 5.30mm Width) package, it can be found as an embedded module. It is packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. In order for it to operate, it needs a supply voltage of 2V~3.6V. A temperature of -40°C~85°C is used for operation. An FPGA of this type belongs to the 74LCX series. Electronic parts with 8 bits are designed for this application. This device is designed with 20 terminations. There is no doubt that it belongs to the family 74LCX373. In order to operate it, the supply voltage must be 2.5V. In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z. Designed with 20 pins, it is compatible with a wide range of devices. It is mounted according to the Surface Mount method. 2 ports are available on this device. This part can be found within the FF/Latches subcategory. There should be a voltage supply (Vsup) greater than 2V. Electronic circuits comprise 2 input lines. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Input lines are converted into binary equivalents by 3 output lines. It consumes 10μA of quiescent current without being affected by external factors.
74LCX373SJX Features
20-SOIC (0.209, 5.30mm Width) package
74LCX series
8 Bits
74LCX373 family
20 pins
74LCX373SJX Applications
There are a lot of ON Semiconductor 74LCX373SJX Latches applications.
- Pattern generators
- Parallel Input
- Clocks
- Programmable binary
- Serial Output Data Queuing
- Avionics
- PCs and Notebooks
- High-speed logic
- Storage
- Motor Drives
