74LCX374BQX
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 123mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LCX374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 8.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.5mm |
| Width | 2.5mm |
| RoHS Status | RoHS Compliant |
74LCX374BQX Overview
20-WFQFN Exposed Padis the way it is packaged. The package Tape & Reel (TR)contains it. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. Powered by a 2V~3.6Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74LCX series. It should not exceed 150MHzin its output frequency. In total, there are 1 elements. A total of 20 terminations have been made. The object belongs to the 74LCX374 family. The power source is powered by 2.5V. This T flip flop has a capacitance of 7pF farads at the input. Devices in the LVC/LCX/Zfamily are electronic devices. It is mounted in the way of Surface Mount. 20pins are included in its design. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. There is a 3.6Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. A total of 3.3V power supplies are needed to run it. This D flip flop is equipped with 0 ports. It is reported that there are 8 input lines. This D latch consumes 10μA quiescent current at all.
74LCX374BQX Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
3.3V power supplies
74LCX374BQX Applications
There are a lot of ON Semiconductor 74LCX374BQX Flip Flops applications.
- Asynchronous counter
- Modulo – n – counter
- Single Down Count-Control Line
- Digital electronics systems
- Guaranteed simultaneous switching noise level
- Registers
- Storage Registers
- 2 – Bit synchronous counter
- Convert a momentary switch to a toggle switch
- Balanced 24 mA output drivers
