74LCX374MSAX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74LCX |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LCX374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 8.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LCX374MSAX Overview
The package is in the form of 20-SSOP (0.209, 5.30mm Width). You can find it in the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 2V~3.6Vvolts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74LCXseries contain this type of chip. Its output frequency should not exceed 150MHz Hz. A total of 1elements are present in it. It consumes 10μA of quiescent There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74LCX374 family contains it. A voltage of 2.5V is used as the power supply for this D latch. A 7pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of LVC/LCX/Z. In this case, the electronic component is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The design is based on 8bits. For normal operation, the supply voltage (Vsup) should be above 2V. The superior flexibility of this product is achieved by using 8 circuits. A total of 2ports are embedded in the D flip flop. In order to operate, the chip has 3 output lines.
74LCX374MSAX Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
74LCX374MSAX Applications
There are a lot of ON Semiconductor 74LCX374MSAX Flip Flops applications.
- Power down protection
- Asynchronous counter
- Cold spare funcion
- Registers
- Common Clocks
- Counters
- EMI reduction circuitry
- CMOS Process
- Frequency division
- Functionally equivalent to the MC10/100EL29
