74LCX374MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LCX374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 8.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LCX374MTC Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. A package named Tubeincludes it. T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~3.6Vvolts. It is operating at a temperature of -40°C~85°C TA. D-Typedescribes this flip flop. It belongs to the 74LCXseries of FPGAs. There should be no greater frequency than 150MHzon its output. A total of 1elements are contained within it. The number of terminations is 20. The 74LCX374family includes it. An input voltage of 2.5Vpowers the D latch. The input capacitance of this T flip flop is 7pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. LVC/LCX/Zis the family of this D flip flop. Surface Mount mounts this electronic component. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latches. An electronic part designed with 8bits is used in this application. The supply voltage (Vsup) should be kept above 2V for normal operation. The superior flexibility of this product is achieved by using 8 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with RAIL. The flip flop contains 2ports. In order to operate, the chip has 3 output lines. Despite external influences, it consumes 10μAof quiescent current.
74LCX374MTC Features
Tube package
74LCX series
20 pins
8 Bits
74LCX374MTC Applications
There are a lot of ON Semiconductor 74LCX374MTC Flip Flops applications.
- Pattern generators
- Memory
- Synchronous counter
- QML qualified product
- Modulo – n – counter
- Shift Registers
- Patented noise
- Bus hold
- 2 – Bit synchronous counter
- Supports Live Insertion
