74LCX374SJX
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 481.5mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74LCX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Base Part Number | 74LCX374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 8.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LCX374SJX Overview
It is embeded in 20-SOIC (0.209, 5.30mm Width) case. It is included in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 2V~3.6V is required for operation. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74LCXseries contain this type of chip. Its output frequency should not exceed 150MHz. In total, it contains 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74LCX374family make up this object. A voltage of 2.5V is used to power it. Its input capacitance is 7pFfarads. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. There is an electronic part that is mounted in the way of Surface Mount. 20pins are included in its design. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with 8bits. For normal operation, the supply voltage (Vsup) should be kept above 2V. In order to achieve its superior flexibility, 8 circuits are used. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to operate, the chip has 3 output lines. Despite external influences, it consumes 10μAof quiescent current.
74LCX374SJX Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
74LCX374SJX Applications
There are a lot of ON Semiconductor 74LCX374SJX Flip Flops applications.
- Single Up Count-Control Line
- Parallel data storage
- High Performance Logic for test systems
- Frequency Dividers
- Digital electronics systems
- Bounce elimination switch
- Buffer registers
- Bus hold
- Individual Asynchronous Resets
- Data Synchronizers
