74LCX573TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LCX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Max Supply Current | 10μA |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LCX573TTR Overview
In the package 20-TSSOP (0.173, 4.40mm Width), it can be found. Tape & Reel (TR) is the packaging method. It uses Tri-State as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. Surface Mount is used to mount this electronic part. A 2V~3.6V voltage supply is required for operation. The operating temperature is -55°C~125°C. The 74LCX series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. As far as this device is concerned, it has no terminations. It is a member of the 74LCX573 family. In order to function, the supply voltage should be set to 2.7V. 20 pins are available on it. LVC/LCX/Z is the family name of this electronic device. The pin configuration of the device is 20. A Surface Mount mounting method has been used for this electronic part. 2 ports are available on this device. It belongs to the subcategory of FF/Latches. A voltage greater than 2V must be supplied as a power supply (Vsup). The device's reliable performance makes it a good choice for TAPE AND REEL. There are 3 output lines that correspond to the binary equivalents of the input line. It consumes 10μA of quiescent current without being affected by outside factors. The superior flexibility of the system is achieved through its use of 8 circuits.
74LCX573TTR Features
20-TSSOP (0.173, 4.40mm Width) package
74LCX series
8 Bits
74LCX573 family
20 pin count
20 pins
74LCX573TTR Applications
There are a lot of STMicroelectronics 74LCX573TTR Latches applications.
- Display driver
- BCD counting
- Automotive Body Electronics
- Instrumentation
- Hammer
- Digital bus buffer
- Clocks
- Storage
- Accumulator Registers
- Double bus register system
