74LCX574FT(AE)
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 20 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Frequency | 150MHz |
| JESD-30 Code | R-PDSO-G20 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Number of Ports | 2 |
| Propagation Delay | 8.5 ns |
| Quiescent Current | 10μA |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 7pF |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LCX574FT(AE) Overview
TSSOPis the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. A total of 1elements are contained within it. Terminations are 20. A voltage of 1.8V is used to power it. It is a member of the LVC/LCX/Zfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. There is a clock edge trigger type of Positive Edgeon this device. The maximal supply voltage (Vsup) reaches 3.6V. The flip flop has 2ports embedded within it. As a result, it consumes 10μA of quiescent current without being affected by external factors. 24mA is set as the high level output current. In the low level output current setting, the current is set to 24mA. It is recommended that the operating temperature be lower than 85°C. It should be higher than -40°Cwhen the system is operating. It is possible to achieve a frequency of 150MHz. The logic IC it adopts is BUS DRIVER. As a result, it is equipped with 1 functions .
74LCX574FT(AE) Features
Tape & Reel (TR) package
1 Functions
74LCX574FT(AE) Applications
There are a lot of Toshiba 74LCX574FT(AE) Flip Flops applications.
- Balanced 24 mA output drivers
- Divide a clock signal by 2 or 4
- Dynamic threshold performance
- Individual Asynchronous Resets
- Convert a momentary switch to a toggle switch
- Matched Rise and Fall
- Supports Live Insertion
- Power down protection
- Test & Measurement
- Data storage
