74LCX74M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 240.999296mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | 74LCX |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | D-Type |
| Voltage - Supply | 2V~3.6V |
| Base Part Number | 74LCX74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Output Current | 24mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LCX74M Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. The Tubepackage contains it. T flip flop uses Differentialas the output. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. Powered by a 2V~3.6Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. D-Typeis the type of this D latch. This type of FPGA is a part of the 74LCX series. You should not exceed 150MHzin the output frequency of the device. The object belongs to the 74LCX74 family. Input capacitance of this device is 7pF farads. A part of the electronic system is mounted in the way of Surface Mount. A total of 14pins are provided on this board. Its clock edge trigger type is Positive Edge. As a result of its output current of 24mA, it is very flexible in terms of design. It consumes 10μA current. Currently, there are 2 channels available.
74LCX74M Features
Tube package
74LCX series
14 pins
74LCX74M Applications
There are a lot of ON Semiconductor 74LCX74M Flip Flops applications.
- Load Control
- Dynamic threshold performance
- Communications
- Memory
- Balanced 24 mA output drivers
- Buffered Clock
- High Performance Logic for test systems
- Storage registers
- Latch
- Divide a clock signal by 2 or 4
