74LCX74MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 55.3mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | 74LCX |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~3.6V |
| Base Part Number | 74LCX74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Output Current | 24mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LCX74MTC Overview
The flip flop is packaged in a case of 14-TSSOP (0.173, 4.40mm Width). You can find it in the Tubepackage. There is a Differentialoutput configured with it. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 2V~3.6V. A temperature of -40°C~85°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74LCXseries FPGA. It should not exceed 150MHzin terms of its output frequency. D latch belongs to the 74LCX74 family. A 7pFfarad input capacitance is provided by this T flip flop. This electronic part is mounted in the way of Surface Mount. There are 14pins on it. A Positive Edgeclock edge trigger is used in this device. The superior flexibility of this circuit is achieved by using 2 circuits. Its output current of 24mAallows for maximum design flexibility. There is 10μA quiescent current consumption by it.
74LCX74MTC Features
Tube package
74LCX series
14 pins
74LCX74MTC Applications
There are a lot of ON Semiconductor 74LCX74MTC Flip Flops applications.
- Set-reset capability
- ESCC
- ESD performance
- Power down protection
- Control circuits
- Differential Individual
- Counters
- High Performance Logic for test systems
- Event Detectors
- Data storage
