Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Supplier Device Package |
24-TSSOP |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74LCX |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
2V~3.6V |
Base Part Number |
74LCX841 |
Output Type |
Tri-State |
Number of Elements |
1 |
Circuit |
10:10 |
Polarity |
Non-Inverting |
Number of Circuits |
1 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2V |
Number of Bits |
10 |
Propagation Delay |
7 ns |
Turn On Delay Time |
1.5 ns |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
High Level Output Current |
-24mA |
Low Level Output Current |
24mA |
Number of Input Lines |
2 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Delay Time - Propagation |
1.5ns |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74LCX841MTC Overview
In the 24-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. It is packaged in the way of Tube. In its configuration, Tri-State is used as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. The electronic component is mounted according to the Surface Mount method. It operates at a voltage of 2V~3.6V. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74LCX family. This electronic part is designed with 10 Bits. This type belongs to the 74LCX841 family. There are 24 pins on it. Surface Mount is used to mount this electronic part. It consists of 2 input lines from which an electronic circuit can be built. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 1 elements make up this object. 1 circuits enable it to achieve high performance. It is set to zero for the low level output current. -24mA represents the high level output current. There should be a temperature below 85°C at which the system is operating. In order for the system to operate properly, the operating temperature should be higher than -40°C. 3.6V is the maximum voltage it supports. There is a minimum supply voltage of 2V for it.
74LCX841MTC Features
24-TSSOP (0.173, 4.40mm Width) package
74LCX series
10 Bits
74LCX841 family
24 pins
1 elements
74LCX841MTC Applications
There are a lot of ON Semiconductor 74LCX841MTC Latches applications.
- Hammer
- Multistage ripple counting
- Counters
- Hammer Device Information
- Counting
- Relay replacement
- Four-bit storage with output enable
- Parallel data storage
- Avionics
- Display driver