74LCXH16374MTDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 421mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LCXH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~3.6V |
| Base Part Number | 74LCXH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Bits | 16 |
| Clock Frequency | 170MHz |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 6.2 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LCXH16374MTDX Overview
The package is in the form of 48-TFSOP (0.240, 6.10mm Width). You can find it in the Tape & Reel (TR)package. T flip flop is configured with an output of Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~3.6V is required for operation. -40°C~85°C TAis the operating temperature. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74LCXH series. You should not exceed 170MHzin its output frequency. It consumes 20μA of quiescent current without being affected by external factors. You can search similar parts based on 74LCXH16374. This T flip flop has a capacitance of 7pF farads at the input. There is an electronic part that is mounted in the way of Surface Mount. This board has 48 pins. This device exhibits a clock edge trigger type of Positive Edge. This flip flop is designed with 16 Bits. To operate, the chip has a total of 3 output lines. Currently, there are 2 lines of input.
74LCXH16374MTDX Features
Tape & Reel (TR) package
74LCXH series
48 pins
16 Bits
74LCXH16374MTDX Applications
There are a lot of ON Semiconductor 74LCXH16374MTDX Flip Flops applications.
- Parallel data storage
- Buffered Clock
- Computing
- Memory
- ESCC
- Load Control
- Data storage
- Bus hold
- Balanced 24 mA output drivers
- Pattern generators
