74LV125N,112
| Parameters | |
|---|---|
| Number of Bits per Element | 1 |
| Control Type | ENABLE LOW |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | TYPICAL VOLP < 0.8V AT VCC = 3.3V, TA = 25 DEGREE C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 1V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV125 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Number of Elements | 4 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Family | LV/LV-A/LVX/H |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | Buffer, Non-Inverting |
| Output Polarity | TRUE |
| Max I(ol) | 0.008 A |
74LV125N,112 Overview
Logical driver uses a neat 14-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 16mA 16mA. Logical driver can deal with 3-State output (s). All of the 4 elements are put into use. Digital buffer is one of the 74LV series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. There is a LV/LV-A/LVX/H family part that is attached to this electronic component. 14 pins are set with the electric part. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74LV125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. It is recommended to use a 3.3V power supply. To supply the device, a minimum voltage of 1V is a must. Logical driver features TYPICAL VOLP < 0.8V AT VCC = 3.3V, TA = 25 DEGREE C to better serve the need.
74LV125N,112 Features
Bus Driver/Transceivers
TYPICAL VOLP < 0.8V AT VCC = 3.3V, TA = 25 DEGREE C
74LV125N,112 Applications
There are a lot of NXP USA Inc. 74LV125N,112 Buffers & Transceivers applications.
- IPTV front end
- Satellite communications networks
- Ethernet circuitry
- Desktop PC
- Wireless smart house
- Carrier phase observations
- Vehicle, ship, aircraft navigation and positioning
- Remote controls
- Mainframes, workstations or storage devices
- TV signal transmission
