74LV138DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 1V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV138 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Propagation Delay | 50 ns |
| Quiescent Current | 160μA |
| Turn On Delay Time | 55 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 12mA 12mA |
| Supply Type | Single |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LV138DB,118 Overview
Providing this information in the 16-SSOP (0.209, 5.30mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC Decoder/Demultiplexer is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~125°C.Using a 1V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74LV series can be used in a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74LV138, so you can find its logic switch related parts using that number.In multiplexer's system, 3.3V is the voltage supplied.A component pin count of 16 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.As a type of supply, Single is employed.Currently, it is configured with a 16 pin configuration.The mounting point is Surface Mount.The logic switch is a member of the LV/LV-A/LVX/H family.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 1V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.Despite not interacting with external factors, it consumes 160μA current of multiplexer ic.When a supply voltage of 3.3V is used, reliable performance of the multiplexers can be achieved.For the purpose of accepting voltage levels, the multiplexers have 3 input lines.In this case, the signal source has a total of 8 output lines.
74LV138DB,118 Features
Supplied in the 16-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
3 input lines
8 output lines
74LV138DB,118 Applications
There are a lot of Nexperia USA Inc. 74LV138DB,118 Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- Communication system
- High-performance memory-decoding applications
- War field flying robot with a night vision flying camera
- Medium scale TV wall
- Make half adder
- Logic gates for other digital devices
- Enabling different functions units in microprocessor instruction decoding
- Analog to digital conversion
- Automation system
