74LV138PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 1V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV138 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Propagation Delay | 50 ns |
| Quiescent Current | 160μA |
| Turn On Delay Time | 55 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 12mA 12mA |
| Supply Type | Single |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LV138PW,112 Overview
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tube.For mounting, digital switch ic uses the method Surface Mount.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 1V~5.5V supply voltage, which gives it a lot of flexibility.As a member of 74LV series, the multiplexers can be used for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.Its logic switch base part number is 74LV138 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 3.3V volts.In this turn signal switch, there are 16 components that can be connected to each pin.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, the supply type is Single.A configuration of 16 pins is used.The mount is in Surface Mount.The logic switch is a member of the LV/LV-A/LVX/H family.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 1V.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.Without the influence of external factors, it consumes 160μA current of multiplexer ic.If the supply voltage is set to 3.3V, reliable performance of the multiplexers can be achieved.A voltage level can be inserted into the 3 input lines of multiplexers.There are 8 output lines designed to serve as the source of the signal.
74LV138PW,112 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
3 input lines
8 output lines
74LV138PW,112 Applications
There are a lot of Nexperia USA Inc. 74LV138PW,112 Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Recording transmission
- High-performance memory-decoding applications
- CNC machines
- Seven segment displays
- Code conversion
- Home automation system
- Electronics industry
- Image transmission
- Automation system
