74LV139BQ,115
| Parameters | |
|---|---|
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV139 |
| Pin Count | 16 |
| JESD-30 Code | R-PQCC-N16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:4 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Family | LV/LV-A/LVX/H |
| Current - Output High, Low | 12mA 12mA |
| Output Polarity | INVERTED |
| Max I(ol) | 0.006 A |
| Propagation Delay (tpd) | 39 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1mm |
| Length | 3.5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
74LV139BQ,115 Overview
Providing this information in the 16-VFQFN Exposed Pad enables digital switch board space to be saved.It is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC Decoder/Demultiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~125°C.When digital controlled switch operates at 1V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers from the 74LV series can be used in a wide range of applications.Among its basic configurations are 16 terminations.There is a base part number 74LV139 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 3.3V volts.In this turn signal switch, there are 16 component pins.Using the point NO LEAD as an end point of conductors, it is used to determine the terminus of a conductor.The logic switch object belongs to the family of LV/LV-A/LVX/H.It is recommended that the minimum supply voltage (Vsup) be kept at 1V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 3.3V.Decoder/Drivers is the classification for this the digital switch ic.The switches package is packaged in accordance with TAPE AND REEL.
74LV139BQ,115 Features
Supplied in the 16-VFQFN Exposed Pad package
Power supplies of 3.3V
74LV139BQ,115 Applications
There are a lot of NXP USA Inc. 74LV139BQ,115 Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- A robotic vehicle with the metal detector
- High-performance memory systems
- Arithmetic Logic Units
- Enabling block of memory depending on address in memory chips
- To select different devices in microprocessor output
- Robotic vehicles
- Make full adder
- Idle motor
- Microprocessor input/output systems
