74LV139PW,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV139 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:4 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Family | LV/LV-A/LVX/H |
| Current - Output High, Low | 12mA 12mA |
| Output Polarity | INVERTED |
| Max I(ol) | 0.006 A |
| Propagation Delay (tpd) | 39 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74LV139PW,118 Overview
Due to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.When the operating temperature is kept at -40°C~125°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 1V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers from the 74LV series can be used in a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The part number for 74LV139 can be used to find its logic switch related parts as well.In this case, 3.3V is the voltage supplied to the multiplexer's system.There are 16 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The logic switch is a member of the LV/LV-A/LVX/H family.The minimal supply voltage (Vsup) should be kept at 1V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.There is a power supply provided for the mux switch's normal operation of 3.3V.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.A TAPE AND REEL packaging method is used in the switches.
74LV139PW,118 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Power supplies of 3.3V
74LV139PW,118 Applications
There are a lot of NXP USA Inc. 74LV139PW,118 Signal Switches / Multiplexers / Decoders applications.
- Encrypted communications system
- Data communication
- Injectors
- High-performance memory-decoding applications
- RF-based home automation system
- D/A converters
- LVDS
- Electronically controlled engine system
- Memory chips
- Enabling different rows of memory depending on address in memory chips
