74LV259DB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV259 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 1:8 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Family | LV/LV-A/LVX/H |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type, Addressable |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 36 ns |
| Trigger Type | LOW LEVEL |
| Independent Circuits | 1 |
| Delay Time - Propagation | 36ns |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74LV259DB,118 Overview
16-SSOP (0.209, 5.30mm Width) contains it. The package is in the form of Tape & Reel (TR). It uses Standard as its output configuration. This electrical device has a logic type of D-Type, Addressable. This electronic part is mounted in the way of Surface Mount. A 1V~3.6V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~125°C. It is a type of FPGA belonging to the 74LV series. With this electronic part, there are 1 bits. A device with this design has 16 terminations. There is no doubt that it belongs to the family 74LV259. In order to function, the supply voltage should be set to 3.3V. There are 16 pins attached to it. It is part of the family of electronic devices called LV/LV-A/LVX/H. Subcategory FF/Latches contains this part. It is possible to reach 3.6V when the maximum supply voltage (Vsup) has been reached. It operates from 3.3V power supplies. A supply voltage (Vsup) greater than 1V is required. The reliability of this device makes it well suited to TAPE AND REEL.
74LV259DB,118 Features
16-SSOP (0.209, 5.30mm Width) package
74LV series
1 Bits
74LV259 family
16 pin count
3.3V power supplies
74LV259DB,118 Applications
There are a lot of NXP USA Inc. 74LV259DB,118 Latches applications.
- Control circuits
- Display driver
- Hammer Device Information
- Buffer/Storage Registers
- Sample and hold register
- Motor Drives
- Parallel data storage
- Up/down difference counting
- Buffer register
- Frequency
