74LV259PW,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV259 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 1:8 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Family | LV/LV-A/LVX/H |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type, Addressable |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 36 ns |
| Trigger Type | LOW LEVEL |
| Independent Circuits | 1 |
| Delay Time - Propagation | 36ns |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74LV259PW,118 Overview
In the package 16-TSSOP (0.173, 4.40mm Width), it can be found. A Tape & Reel (TR) package is used to package it. There is a Standard output configured. The Logic type of this electrical device is D-Type, Addressable. Mounting this electronic component follows the Surface Mount method. A 1V~3.6V voltage supply is required for operation. A temperature of -40°C~125°C is used for operation. This FPGA is part of the 74LV series. The design of this electronic part contains 1 bits. In this device, there are 16 terminations. It belongs to 74LV259 family. A 3.3V voltage supply is required for operation. There are 16 pins attached to it. In the world of electronics, this electronic device belongs to the family of LV/LV-A/LVX/H. The part is in the FF/Latches subcategory. Vsup reaches 3.6V as the maximum supply voltage. 3.3V power supplies are needed to operate it. A supply voltage (Vsup) greater than 1V is required. Based on its reliable performance, this device is suitable for TAPE AND REEL.
74LV259PW,118 Features
16-TSSOP (0.173, 4.40mm Width) package
74LV series
1 Bits
74LV259 family
16 pin count
3.3V power supplies
74LV259PW,118 Applications
There are a lot of NXP USA Inc. 74LV259PW,118 Latches applications.
- Clocks
- TV Set-top Boxes
- Hammer
- Parallel Input
- Serial Output Data Queuing
- Ring counter
- Multistage ripple counting
- Automotive Infotainment
- A/D and D/A conversion
- Multi-line decoders
