74LV373DB,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1998 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TYPICAL VOLP < 0.8V AT VCC = 3.3V, TA = 25 DEGREE C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV373 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | LV/LV-A/LVX/H |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 28 ns |
| Independent Circuits | 1 |
| Delay Time - Propagation | 20ns |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74LV373DB,112 Overview
It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. This package has the format of Tube. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. The electronic component is mounted according to the Surface Mount method. A voltage of 1V~5.5V is used as the supply voltage for this device. The temperature at which the machine is operating is -40°C~125°C. In the 74LV series, this FPGA is located. An electronic part with 8 bits is designed. In this device, there are 20 terminations that have been designed. It belongs to 74LV373 family. With the supply voltage set at 3.3V, it is able to operate. There are 20 pins attached to it. In the world of electronics, this electronic device belongs to the family of LV/LV-A/LVX/H. In this device, there are 2 ports. This part is included in FF/Latches. There is a maximum voltage supply (Vsup) that reaches 5.5V. There are 3.3V power supplies required for this machine to operate. A voltage greater than 1V must be supplied as a power supply (Vsup). Additionally, it is characterized by TYPICAL VOLP < 0.8V AT VCC = 3.3V, TA = 25 DEGREE C.
74LV373DB,112 Features
20-SSOP (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
3.3V power supplies
74LV373DB,112 Applications
There are a lot of NXP USA Inc. 74LV373DB,112 Latches applications.
- Parallel data synchronization
- Automatic test equipment
- Up-Down Johnson
- Frequency
- Display driver
- Display
- Up/down difference counting
- Parallel Input
- Control circuits
- Motor Drives
