74LV377D,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 1V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV377 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Clock Frequency | 70MHz |
| Family | LV/LV-A/LVX/H |
| Current - Quiescent (Iq) | 160μA |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 36 ns |
| fmax-Min | 20 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74LV377D,118 Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. Currently, the output is configured to use Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 1V~3.6V volts, it operates. It is at -40°C~125°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. It belongs to the 74LVseries of FPGAs. This D flip flop should not have a frequency greater than 70MHz. D latch consists of 1 elements. As a result, it consumes 160μA of quiescent current without being affected by external factors. The number of terminations is 20. D latch belongs to the 74LV377 family. The power supply voltage is 3.3V. A 3.5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as LV/LV-A/LVX/H. As soon as 5.5Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 1V. Additionally, you may refer to the additional WITH HOLD MODE of the electronic flip flop.
74LV377D,118 Features
Tape & Reel (TR) package
74LV series
74LV377D,118 Applications
There are a lot of NXP USA Inc. 74LV377D,118 Flip Flops applications.
- Clock pulse
- Set-reset capability
- Communications
- Reduced system switching noise
- Frequency Divider circuits
- Modulo – n – counter
- Bus hold
- Automotive
- Shift Registers
- Digital electronics systems
