74LV393PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 1V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 90MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV393 |
| Pin Count | 14 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 1V |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 60 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 20MHz |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74LV393PW,118 Overview
This is a device supplied in the 14-TSSOP (0.173, 4.40mm Width) package. The configuration of this device is based on 14terminations. By supplying 3.3Vwith a voltage of 3.3V , the device can be operated in a completely flexible manner. The 2elements are connected by wires. The number of all component pins is 14. As a result, it is packaged as Tape & Reel (TR). Circuit components are connected by 14pins. The way of Surface Mount is used to mount it. In this case, it appears as a member of the family [0]. Due to its membership in the 74LVseries, it is suitable for a variety of applications. Binary Counteris adopted as the logic type. Ideally, the operating temperature should be set to -40°C~125°C. Mounting type Surface Mountis used. When a supply voltage of 1V~3.6Vis provided, it can operate with greater reliability. There are 4 bits stored in each element of the array. You can find more related parts under its base part number of 74LV393. In order to operate, it requires a voltage of [0]. Supply voltages can be as low as 1V volts (Vsup). It operates at a frequency of 90MHz Hz. It is possible to reach a maximum supply voltage of 5.5VV (Vsup).
74LV393PW,118 Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Operating supply voltage of 3.3V
Frequency of 90MHz
74LV393PW,118 Applications
There are a lot of Nexperia USA Inc. 74LV393PW,118 Counters & Dividers applications.
- Timing applications
- Fixed and programmable counters greater than 10
- counting/frequency sy nthesizers-BCD output
- Digital multiplexing and demultiplexing
- ALGEBRAIC COMPUTATION
- Up Counters
- Communications Digital Frequency Synthesizers;
- LINEARIZATION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Frequency dividers
