74LV4051BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 135Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 145 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 145 ns |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 34ns, 29ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Length | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LV4051BQ,115 Overview
As the electronic part is packed in 16-VFQFN Exposed Pad, international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Temperatures around -40°C~125°C TA are extended for operation. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 8 channels. A 2V voltage supply should turn on and run the electronic component. Into the electrical component body are injected 16 pins. It consists of 1 circuits. Use 74LV4051 to search for variants of the digital switches. As far as internal resistance is concerned, it has 135Ohm. Datasheets for 16 pin functions are available upon request. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. An effective Dual, Single supply digital multiplexer. 1V should be the lowest voltage fed to the electronic component. For this digital switch to work, 80μA current would suffice. This analogue multiplexer requires a voltage of 1V~6V when it drains from a single voltage supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. The electrical part can be operated at 3.3V voltage levels. This switch operates within the bandwidth of 200MHz.
74LV4051BQ,115 Features
8 Channels
80μA Supply Current
Bandwidth: 200MHz
74LV4051BQ,115 Applications
There are a lot of Nexperia USA Inc. 74LV4051BQ,115 Analog Switches & Multiplexers ICs applications.
- HDTV
- Precision data acquisition
- Imaging
- ISDN NT1/TA
- Automatic test equipment
- Battery Powered Instruments
- Medical Instrumentation
- DVD-R
- Industrial control systems
- Fault Tolerant Systems
