74LV4051D,118
| Parameters | |
|---|---|
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 23 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Dual, Single |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 85Ohm |
| High Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Number of Input Lines | 8 |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 34ns, 29ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 135Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4051 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
74LV4051D,118 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. The electronic part delivers high-quality output through its 8 channels. Powered by a 2V voltage supply, the electrical part should be switched on and run. A total of 16 pins are injected into the body of the electronic part. Try searching with 74LV4051 to find analog multiplexer variants. As far as internal resistance is concerned, it has 135Ohm. Datasheets for 16 pin functions are available upon request. Users shouldn't supply more than 6V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1V. For this digital switch to work, 80μA current would suffice. This analog switch requires a voltage of 1V~6V to drain from a single voltage supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. The electronic component can function from 3.3V. In this digital multiplexer, there are 1 outputs.
74LV4051D,118 Features
8 Channels
80μA Supply Current
-3db Bandwidth: 200MHz
74LV4051D,118 Applications
There are a lot of Nexperia USA Inc. 74LV4051D,118 Analog Switches & Multiplexers ICs applications.
- Routers
- PBXs
- Communications systems
- Microprocessor controlled systems
- Digital access cross connects
- Medical systems
- Channelized and Unchannelized DS3 applications
- Intelligent PBX
- Avionics test equipment
- PBX interfaces
