74LV4051DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 135Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 145 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 145 ns |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 34ns, 29ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LV4051DB,118 Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~125°C TA. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. With a 2V voltage supply, the electrical component should be turned on and run. There is an electrical component included in the 16 series. Circuits number 1 make up this analogue multiplexer. Try searching for 74LV4051 variants of the analog switch ic. In this multiplexer, the internal resistance is 135Ohm. To find out what the 16 pins do, please refer to the datasheets. Multiplexers should not be powered above 6V in normal situations. An effective Dual, Single supply digital multiplexer. 1V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 80μA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 1V~6V volts. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. The electronic component can function from 3.3V. There are 8 inputs to be operated. 200MHz bandwidths enable data to be transferred.
74LV4051DB,118 Features
8 Channels
80μA Supply Current
Bandwidth: 200MHz
74LV4051DB,118 Applications
There are a lot of Nexperia USA Inc. 74LV4051DB,118 Analog Switches & Multiplexers ICs applications.
- HDTV
- Audio signal routing
- PBXs
- Routers
- Digital access cross connects
- Medical
- Isolation
- SDH
- Residential Gateways, Home Gateway/Router
- Cell phones
