74LV4051PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 34ns, 29ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
74LV4051PW,112 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 16. A 8 channel electronic part produces high-quality output. If the voltage supply is 2V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A total of 1 circuits make up this switch device. Search with 74LV4051 if you are looking for analog multiplexer variants. The voltage required by this switch device is 1V~6V, draining from a single voltage supply. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
74LV4051PW,112 Features
8 Channels
-3db Bandwidth: 200MHz
74LV4051PW,112 Applications
There are a lot of Nexperia USA Inc. 74LV4051PW,112 Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- Sample-and-hold systems
- CSU
- Channel Banks
- DSLAMs
- Video signal routing
- Public switching systems
- Industrial
- Video switching
- Imaging
