74LV4051PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 135Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 145 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 145 ns |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 34ns, 29ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Drain to Source Resistance | 375Ohm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LV4051PW,118 Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 8 channels. Turning on and running the electrical part should be easy with a 2V voltage supply. This electrical component is included in the 16 series of products. Circuits number 1 make up this analogue multiplexer. Using the 74LV4051 search parameter, you can discover variants of the switch. There is 135Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. Users shouldn't supply more than 6V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. 1V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 80μA current. This analogue multiplexer requires a voltage of 1V~6V when it drains from a single voltage supply. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. A voltage of 3.3V can be used to operate the electronic component. It is possible to operate 8 inputs. It is possible to transfer data over a 200MHz-bandwidth. There is 375Ohm Drain to Source resistance on this electronic part.
74LV4051PW,118 Features
8 Channels
80μA Supply Current
Bandwidth: 200MHz
Drain-to-Source resistance: 375Ohm
74LV4051PW,118 Applications
There are a lot of Nexperia USA Inc. 74LV4051PW,118 Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- Frame Relay Equipment
- Communications systems
- Imaging
- Mechanical reed relay replacement
- Sample-and-hold systems
- High reliability control systems
- Intelligent PBX
- Microprocessor controlled systems
- RGB switches
