74LV4052D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 135Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4052 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 190 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 125 ns |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 46ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 56ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LV4052D,112 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. Operating temperature around -40°C~125°C TA extended. Total terminations are 16. This electronic part offers high-quality output due to its 4 channels. Powered by a 6V voltage supply, the electrical part should be switched on and run. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SP4T switching circuits. There are 2 circuits in this switch device. Using the 74LV4052 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 135Ohm. For details about the functions of 16 pins, please refer to the datasheets. Multiplexers should not be powered above 6V in normal situations. Dual, Single supply type digital switch with a low cost. 1V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 80μA would be sufficient for this switch device. This analog switch requires a voltage of 1V~6V to drain from a single voltage supply. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. This electrical part is compatible with 3.3V operating voltages. There are 8 inputs to be operated. 200MHz bandwidths enable data to be transferred.
74LV4052D,112 Features
4 Channels
Switch Circuit: SP4T
80μA Supply Current
Bandwidth: 200MHz
74LV4052D,112 Applications
There are a lot of Nexperia USA Inc. 74LV4052D,112 Analog Switches & Multiplexers ICs applications.
- Modems
- High-Voltage
- ISDN NT1/TA
- SDH/SONET multiplexers
- ATM
- Central office
- Cable Modem
- Wireless Local Loop
- New designs requiring multiplexer functions
- Video switching
