74LV4052DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 135Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4052 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 400mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 190 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 125 ns |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 46ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 56ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LV4052DB,118 Overview
The electrical component comes in 16-SSOP (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 4:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. It is safe to turn on and run the electronic component with a 6V voltage supply. It is part of the design of the 16 series that this electronic component is included. SP4T switching circuits are used in these analog switch ics. Circuits number 2 make up this analogue multiplexer. Try searching with 74LV4052 if you're looking for variants. This digital multiplexer has 135Ohm internal resistance. The functions of 16 pins can be found in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 1V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 80μA would be sufficient for this switch device. An analogue multiplexer drains from a single voltage supply at 1V~6V. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. Operating voltages of 3.3V are compatible with the electrical part. It is possible to operate 8 inputs. In 200MHz-bandwidths, data can be transferred.
74LV4052DB,118 Features
4 Channels
Switch Circuit: SP4T
80μA Supply Current
Bandwidth: 200MHz
74LV4052DB,118 Applications
There are a lot of Nexperia USA Inc. 74LV4052DB,118 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- SDH
- Automatic test equipment
- DVD-R
- Digital cross connects (DSX-1)
- Low-Voltage
- Switching Systems
- Private Branch Exchange (PBX)
- RGB switches
- High-Voltage
