74LV4052N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4052 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 46ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 56ns |
| Switch-off Time-Max | 38ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| RoHS Status | ROHS3 Compliant |
74LV4052N,112 Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have a ratio of 4:1. Operating temperature around -40°C~125°C TA extended. In total, there are 16 terminations. High-quality output is provided by the electronic component's 4 channels. When a voltage supply of 6V is used, the electronic component should be turned on and run. Into the electrical component body are injected 16 pins. Unlike digital switches, these are based on SP4T switching circuits. The multiplexer consists of 2 circuits. Using the 74LV4052 search parameter, you can discover variants of the switch. Theswitch device is a typical Multiplexer or Switches. This analog switch requires a voltage of 1V~6V to drain from a single voltage supply. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board.
74LV4052N,112 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 200MHz
74LV4052N,112 Applications
There are a lot of NXP USA Inc. 74LV4052N,112 Analog Switches & Multiplexers ICs applications.
- HDTV
- Imaging
- Cable PC
- High speed data transmission line cards
- Microwave transmission systems
- Routers
- Mechanical reed relay replacement
- Cell phones
- FTTH
- Microprocessor controlled systems
